Williams AV IR+ Flex

General Description

IR+ system features with two emitters, bracket and ADA sign.

Delivery Includes

1 IR M1 infrared modulator
2 IR E4 emitter
1 IDP 008 accessibility sign
1 MLB 003 linking barMLB 003 linking bar

Technical Data

Dimensions: (W) x (H) x (D) 48.3 cm x 4.5 cm x 20.8 cm
Weight:  2.4 kg
Color:    Black
Rack Mount:    Single Rack Unit
Power Supply:    International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output: +48VDC, 0.75A center-positive
Power Switch:    Rocker switch with LED
Signal to Noise Ratio:    67 dB (typical)
Modulation:    FM Wideband, +50kHz deviation, 50uS pre-emphasis
Carrier Frequency:    Selectable, 2.3/2.8 or 3.3/3.8MHz
Frequency Response:    40 to 16,000Hz, +1 dB, -3dB, electrical response
Total Harmonic Distortion:    Less than 2%, electrical response
Audio Processor Functions:    DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
Auto Carrier Shut-Off:    Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
Infrared Test LED:    Dual IR LED for receiver testing, monitoring, and audio signal testing.
Audio Input:    (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
Dante:    Optional
Internal Test Tone:    400 Hz internal test tone selectable as audio input source for setup and diagnostics
Remote Configuration:    Available through embedded website
Headphone Output:    (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs
Emitter Output Jack:    Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.
Operating requirements:    0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals:    CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty:    2 years on Modulator, 90 days on accessories
IR E4
Dimensions:  W x H x D (19.1 cm x 3.6 cm x 9.1 cm)
Weight: 362 g
Color:    Black
Power:    48 VDC supplied by IR M1 via CAT 5e cable.
Coverage Area:    Up to 18,000 square feet in single channel mode
Connectivity:    +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
Operating requirements:    0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals:    CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty:    2 years on Emitter; 90 days on accessories