Menu

Search

Contacta “Above the Counter” loop kit with Mouse microphone

£214.20 £178.50

The Contacta “Above the Counter” Loop Kit is a complete system designed for counter installation and is most suitable for ticket counters, reception desks, and other point of sale locations. . The aerial is combined within the sign and is fixed to the counter or desk surface, enabling users to easily identify the loop and get maximum benefit from it. The unit can be fitted into many positions due to its low profile design.

Free shipping on all orders £150 and over

01686 628012

General Description

The Contacta “Above the Counter” Loop Kit is a complete system designed for counter installation and is most suitable for ticket counters, reception desks, and other point of sale locations. . The aerial is combined within the sign and is fixed to the counter or desk surface, enabling users to easily identify the loop and get maximum benefit from it. The unit can be fitted into many positions due to its low profile design.

This complete system comprises of a loop amplifier, low-profile mouse microphone, loop sign with contained aerial, power supply and fixings.

For use in any situation where one to one communication takes place at a counter, booth or desk, for example: Banks, Post offices, Supermarkets, Theatres, Information Centres, and Airports.

Features

Complete kit ready for installation
Microprocessor controlled
Energy-saving ‘green’ standby mode achieves 80% power saving
Advanced audio processing features AGC, compression, and noise gate
Constant-current loop drive
Continuous self-testing
Isolate audio line input allows the driver to take alternative audio sources (optional)
Power and LED status indicators

Delivery Includes

IL-K300-05-00 system comprising
1 HLD2 loop amplifier
1 Mouse microphone
1 Hearing loop aerial within the sign
1 Power supply
1 Fixings set

Technical Data

HLD2 Loop amplifier
Dimensions (H x W x D): 116 x 116.2 x 40mm
Weight: 300g
Construction: ABS Plastic Construction Housing
Finish: Matt Black, Fine Texture
Inputs: Input 1 (Microphone): Screw terminals on 3.8mm 2 pole Phoenix connector.
Single-ended electret microphone, powered by 5V via 2.2K ohms
Input 2 (Line) (Optional): Screw terminals on 3.8mm 2 pole Phoenix connector.
Transformer isolated, 0dBu into 1K ohms, may have series resistance added for optional 75V or 100V line inputs
Power: Centre positive power jack, 14V DC 2A via 2.1mm from our P55 power supply unit
Loop output: Loop connection: Screw terminals on 3.8mm 2 pole Phoenix connector
Loop drive current: 2A RMS compliance current @ 1Khz sine wave
Loop drive voltage: 4V RMS compliance voltage @ 1KHz sine wave
Audio: Frequency response: 100 Hz – 5kHz (±3dB)
Distortion: Better than -40dB, inputs at nominal level
Automatic gain control: Processor controlled
Dynamic range: 40dB typical
Attack time: 10 milliseconds
Release time: typically 10 seconds, varies with program content
Indications: Status LEDs 3 colour LEDs indicate power, input and output diagnostic information
Connection provided for our LED halo indicator microphone
Self-Test: Microprocessor controlled Unit, including microphone and loop connections is continuously monitored, and internal and external LED indicators are updated
Energy saving: Sound activated Unit will enter low energy “sleep” mode when acoustic conditions indicate lack of usage
Mouse Microphone
Dimensions (H x W x L): 12.4 x 24.65 x 25.5mm
Connection cable length: 2m
Weight: 26g
Construction: ABS Plastic
Finish: Black Fine Texture
Directional response: Omni-directional
Frequency response: 70Hz – 20KHz
Sensitivity: 46dB @ 1KHz
Distortion: Typically less than 1%

More Information
ManufacturerContacta