JTS IN164 radio lapel microphone system (channel 38)

General Description

The JTS IN164 radio lapel microphone system comprises an IN164R PLL UHF single channel diversity receiver, IN264TB bodypack transmitter and CM-501 uni-directional condenser lapel microphone. The system features the World’s first remote control RF setting function that allows automatic remote control frequency settings of the transmitter from the receiver.

The bright LCD display panel shows RF level, Audio level, Battery state, Antenna status, and Channel selection. The receiver has one balanced XLR, and one unbalanced 6.35mm Jack output.

This system operates in channel 38 which is the most reliable solution for portable wireless microphone systems. (Please Note. Channel 38 use requires a licence. For more information please contact us or visit Ofcom).

Features

LCD Displays: RF Level, Audio Level, Low Battery Indicator, Antenna Status, Channel Selection
Powered by 2 x AA batteries with 12 hours average battery life
LCD display with channel, battery state, ID number indication
The “lock-on” function prevents tampering and RF interruption
Extended dynamic range and smooth frequency response
Noise mute and tone-key squelch

Delivery Includes

1 IN164R receiver
1 IN264TB bodypack transmitter
1 CM-501 lapel microphone

Technical Data

IN164/IN264TB+CM-501
IN164R Receiver
Frequency Preparation PLL Synthesized Control
Remoset Radio Frequency: 2.4GHz, Effective distance: 10m
Frequency Range 606.5-642 MHz (CH38 licence required)
S/N Ratio >105dB
T.H.D    <0.6%@1KHz
Display type LCD
Display Contents Channel, Antenna A/B, Mute Display, RF/AF Level Meter, Low battery, ID Number
Controls Power On/Off, Frequency Up/Down, Lock-on, ID Pairing, Remoset
Audio Output Level -12dB
AF Output Impedance 600Ω
Squelch Pilot Tone & Noise Mute
Operation Voltage 12-18 VDC, 500mA
Output Connector 1 Balanced XLR Socket, 1 Unbalanced Ø6.3mm Jack
Dimension 210 x 40 x 165.5mm
IN264TB Bodypack transmitter
Frequency Preparation PLL Synthesized Control
Frequency Range 606.5-642 MHz (CH38 licence required)
RF Outputs 10mW / 50mW (Depend on Local Regulation)
Stability ±10KHz
Frequency Deviation ±48KHz
LCD Display Channel, Battery state,
Controls ID Number, Power On/Off, AF Level, Frequency Up/Down, PAD, Gain Control, ID Pairing, Lock-on Mode
Output connector 4-Pin mini XLR
Spurious Emissions <-50 dBC
Audio Frequency Response 40~18,000 Hz
Battery UM3, AA 1.5V x 2
CM-501 lapel microphone
Connector type: 4-Pin Mini XLR
Frequency Response: 100~15,000 Hz
Polar Pattern: Cardioid
Sensitivity (at 1 KHz): -60±3 dB* (1mV)*0dB=1V/μbar
Impedance: 2.2kΩ
Max. SPL for 1% THD: 130dB
Dimensions: Ø10.1mm x 26.4mm
Weight: 21.5g