JTS RU-992+RU-G3TB dual channel system with bodypack transmitters and lapel microphones (channel 38)

General Description

The RU-992+RU-G3TB+CM-501 is a dual channel diversity system comprising a RU-992 receiver and two JTS RU-G3TB bodypack transmitters with JTS CM-501 lapel microphones.

The JTS RU-992 is a full rack receiver version of the RU-8012DB featuring REMOSET which enables the transmitter and receivers to wirelessly sync frequencies in under a second.

The bodypack receiver has a built in LCD display showing group, channel and battery status. This set also includes a JTS CM-501 which is a small uni-directional condenser lapel microphone with wide dynamic range and frequency response. The microphone includes a clip for attaching to tie, lapel, dress, etc

This system transmits in channel 38 which is the most reliable solution for portable wireless microphone systems. (Please Note. Channel 38 use requires a licence. For more information please contact us or visit (https://www.ofcom.org.uk/manage-your-licence/radiocommunication-licences/pmse).

Features

REMOSET U synchronisation
Dual channel operation
Pilot tone and noise mute
Frequency scan
2 Independent balanced and unbalanced outputs
Phase-locked Loop (PLL) synthesized tuner.
Powered by 2 x AA batteries with 12 hrs. average battery life.
Equipped with 4 Pin Mini XLR connector.
LCD display with channel and battery life indicator, ID number.
The “lock-on” function prevents tampering and RF interruption.
Extended dynamic range and smooth frequency response.
Uni-directional lapel microphone

Delivery Includes

1 RU-992 dual diversity receiver
2 RU-G3TB bodypack transmitter
2 CM-501 lapel microphone

Technical Data

RU-992 dual diversity receiver

Frequency Preparation: PLL Synthesized Control
Carrier Frequency Range: 606.5 - 638 MHz
Frequency Setting: Ultrasonic / REMOSET (Transmit)
Receiving Mode: Antenna Diversity
S/N Ratio: >105dB(A)
T.H.D: <0.6%@1KHz
Sensitivity: -95dBm,S/N>80dB
Rejection Ratio: >80 dB
Frequency Response: 50Hz~16KHz±2dB
Antenna Type: BNC Socket
Antenna Booster Power: DC12~15V/100mA
Display: LCD
Display Contents: Group, Channel, Frequency, Battery Level, Antenna A/B, Mute Display, AF Meter, RF Meter, Frequency Scan, Audio Level, Volume
Controls: Power ON/OFF, Group, Channel, Frequency, Mute Display, Key Lock, Volume, Output Attenuation(XLR), Frequency Scan(ON/OFF)
Audio Output Level: Ref/ ±22.5KHz Dev@1KHz Tone, ψ6.3 Phone Jack/ -10dBV, XLR Jack/ -4dBV(Line) ˴ -24dBV(MIC)
Audio Output Impedance: 600Ω
Squelch: Pilot Tone & Noise Mute
Output Connector: 2 independent balanced XLR and 2 Ø6.3mm unbalanced.
Power Supply: DC12~15V/300mA
Dimension (mm): 420mm(W)* 44mm(H)* 211mm(D)
Notes: Actual product specifications may vary depending on region

RU-G3TB bodypack transmitter

Frequency Preparation: PLL Synthesized Control
Carrier Frequency Range: UHF 606.5 - 638 MHz
Frequency Setting: Remoset U Ultrasonic
RF Outputs: Low/High
Stability: <±10KHz@ Fc
Frequency Deviation: ±48KHz
Spurious Emissions: <-50dBc
Display: LCD+LED
Input Connector: MINI XLR
Controls: Power ON/OFF, Mute ON/OFF, Group, Channel, Frequency, GAIN Adjust, Auto Power Off Adjust, Lock-on Mode
Battery: UM3, AA x2
Slot-in Charging: Yes
Dimensions: 62(W) x 80.3(H) x 22.6(D)

CM-501 lapel microphone

Connector type: 4-Pin Mini XLR
Frequency Response: 100~15,000 Hz
Polar Pattern: Cardioid
Sensitivity (at 1 KHz): -60±3 dB* (1mV)*0dB=1V/μbar
Impedance: 2.2kΩ
Max. SPL for 1% THD: 130dB
Dimensions: Ø10.1mm x 26.4mm
Weight: 21.5g