Williams AV IR SY23 D large-area Dante infrared system with stethoset receivers

General Description

Commercial-grade, large-area Dante infrared system with IR+ transmitter, 2 emitters and array. Comes with Stethoset Receivers.

Delivery Includes

1 IR M1 D infrared modulator with Dante input
2 IR E4 emitters
1 IR A4 array
5 IR RX20 receivers
1 CHG 520 charger
1 IDP 008 ADA wall plaque

Technical Data

Dimensions: W x H x D 48.3 cm x 4.5 cm x 20.8 cm
Weight: 2.4 kg
Colour:    Black
Rack Mount:    Single Rack Unit
Power Supply:    International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output: +48VDC, 0.75A centre-positive
Power Switch:    Rocker switch with LED
Signal to Noise Ratio:    67 dB (typical)
Modulation:    FM Wideband, +50kHz deviation, 50uS pre-emphasis
Carrier Frequency:    Selectable, 2.3/2.8 or 3.3/3.8MHz
Frequency Response:    40 to 16,000Hz, +1 dB, -3dB, electrical response
Total Harmonic Distortion:    Less than 2%, electrical response
Audio Processor Functions:    DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
Auto Carrier Shut-Off:    Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
Infrared Test LED:    Dual IR LED for receiver testing, monitoring, and audio signal testing.
Audio Input:    (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
Dante:    Optional
Internal Test Tone:    400 Hz internal test tone selectable as audio input source for setup and diagnostics
Remote Configuration:    Available through embedded website
Headphone Output:    (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs
Emitter Output Jack:    Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.
Operating requirements:    0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals:    CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty:    2 years on Modulator, 90 days on accessories
IR E4
Dimensions: W x H x D
19.1 cm x 3.6 cm x 9.1 cm
Weight: 362 g
Colour:    Black
Power:    48 VDC supplied by IR M1 via CAT 5e cable.
Coverage Area:    Up to 18,000 square feet in single channel mode
Connectivity:    +48VDC Power, RS-485 communication, and Baseband signals for IR transmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
Operating requirements:    0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals:    CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty:    2 years on Emitter; 90 days on accessories
CHG 520
Dimensions: L x W x H 30.48 cm x 15.875 cm x 3.81 cm
Weight:    13.6g
Colour:    Black metal and plastic
Power Supply Input:    120 VAC
Power Supply:    100-240V / 12VDC TFP 043
Unit Capacity:    5 Units
Indicators:    Individual Charging Indicators: Red LEDs
Warranty:    1 year (90 day warranty on cables and power supply)
Approvals:    WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI
IR RX20
Weight:    1.6 oz
Material and Colour:    IR Transparent polycarbonate, black
Battery Type:    LiPo
Battery Life:    8 hours
Battery Charger:    CHG 520
Operating Temp:    32-122° F (0-50° C)
Range:    Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter
Operating Frequency:    2.3 MHz or 2.8 MHz or stereo
Frequency Response:    100 Hz to 12 kHz, ± 3 dB
Signal to Noise Ratio:    60 dB at 10 m
Controls:    Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power
Acoustic Output:    120 dB MAX SSPL90 with 2 cc coupler
Compatibility:    Compatible with 2.3 MHz and 2.8 MHz IR transmitters
Headphone Jack:    3.5mm stereo
Ear pads:    EAR 089
Approvals:    CE, RoHS, FCC, Canada, RCM, VCCI, WEEE
Warranty:    5 years (90 days on battery)