Signet PDA5-SD Induction loop amplifier with LED display

General Description

The Signet PDA5-SD is a constant current, class-D, free-standing induction loop amplifier that is ideal for use in small to medium size rooms up to a maximum of 200 square metres.

This entry level pro amplifier uses a simple LED user interface.

Features

Up to 200m² coverage
Line level and microphone level (with selectable phantom power) XLR sockets
Outreach connector allows up to 10 utility plates to be added
Anti-tamper lock function prevents unauthorised adjustment of system settings
Class-D output stage for maximum efficiency and very high output
Short circuit protection against loop faults for increased reliability
Fault relay & graphical display provide clear indication of operation and fault status
Designed and manufactured in the UK

Delivery Includes

1 PDA5-SD Induction loop amplifier

Technical Data

Supply Voltage: 230V 50Hz supplied with IEC 320 fused mains lead
Power Consumption: 100W
Line In: Input impedance: 1k + or – input to ground, Sensitivity: -20dBU typical
Microphone: Input impedance: 1k + or – input to ground, Sensitivity: -42dBU typical, Phantom power for electret microphones: 12V selectable (on/off)
Outreach: Input impedance: >10k, Sensitivity: 0dBU typical.
Outreach power: 24V dc nom. available via outreach connector (100mA max.) Loop Type: True current mode, Loop output voltage: 14V, Loop drive current @ 1 ohm: 4.75A
Line Out: 775mV output
Fault Relay: Single pole double throw (SPDT): NC, Common, NO.
Metal Compensation: Up to 10dB / octave design counteracts frequency dependent absorption by metal in the installation
over a bandwidth of approximately 5kHz.
Maximum Coverage Area: 200m², i.e., rooms up to 14m x 14m
Loop impedance: 0.5 to 2 ohms
Frequency Response (-3dB): 100Hz to 5kHz; Distortion: Less than 1 % typical; Signal to Noise Ratio: Better than –65dB any input; AGC Range (3dB change in output voltage current): 10dB. AGC ratio: 20:1.
Sensitivity Level Controls: Line Input, Microphone, 12V Phantom, Outreach, Metal Comp, Loop Drive.
Display & Controls: LED display with 4 membrane control buttons
Connectors: Microphone: 3-pin XLR, Line In: 3-pin XLR, Loop: 2-way binding post, Outreach 4-way pluggable connector, Line Out 3-way pluggable connector, Fault Relay 3-way pluggable connector, 230V ac connector
Dimensions: 67H x 218W x 280D mm
Weight: 2.38kg
Misc: Panel Construction: Mild steel zintec, 1mm thick, black powder coated, IP Rating: IP40; Operating Temp: 0°C to 40°C; Maximum Humidity: 95% non-condensing